Ok donc j’avais un ancien bac de 29 gallons dans le garage et je n’aime vraiment pas mon installation actuelle avec mon sump. Du coup j’ai décidé d’en construire une moi-même. J’ai acheté tout le matos et là je planifie juste.
Je veux pouvoir mettre à la fois l’écumeur et un refugium parce que j’ai un mandarin et je veux un bon surplus de copépodes. Est-ce que cette config a l’air OK ? J’espère qu’à l’avenir je pourrai juste enlever les chaussettes et faire peut-être du 30 puis 40 puis 50 ppi (peut-être plus s’ils ont ça). Comme ça je n’aurai pas à m’inquiéter de remplacer les chaussettes toutes les 2-3 jours.
On dirait que ça a coupé le modèle d’origine, donc je vais poster les deux côtés pour être sûr
Okay so I had an old 29 gallon in the garage and I really don’t like my current set up with my sump. So I decided to build my own. I bought all the stuff and I’m just planning now. I want to fit both the skimmer and a refugium because I have a mandarin and want a good copepod surplus. Does this set up look ok? I’m hoping that in the future I might just take the socks out and do maybe a 30 then 40 then 50 ppi(maybe more if they have that). Just so I don’t have to worry about replacing socks every 2-3 days.
It looked like it cut off the original so I’m going to post both sides of it to be safe
Commentaires
Connecte-toi pour laisser un commentaire
Aucun commentaire pour le moment
Sois le premier à lancer la conversation.
@billy
1y
Is this a baffle kit you bought? Or are you cutting custom acrylic pieces for the sump sections?
@BigCreamy
1y
Cutting custom pieces. I just bought the sheets and a tool
@billy
1y
Ok cool. So I bought a kit and I’ll show you how mine is set up. The sump and refugium have holes in between ( dark blue ) so the water line is the same (light blue). And then from refugium to return pump it’s flipped from what you have. And there is bio blocks and mechanical filtration. My favorite part of the kit is an adjustable height acrylic piece (pink) so you can manually adjust the water height for the skimmer/refugium chamber. The water pressure basically will hold the pink piece against the red. Hopefully that makes any sense hah. Idk if there is a right or wrong way to do a sump. Just wanted to give you more ideas
@BigCreamy
1y
Yeah that’s a good idea! That’s why I posted lol never made one or really even seen a good one. I’ve tried to look up some but they’re all so different so I just went with what I thought looked right. But that makes a lot of sense.
@BigCreamy
1y
Also do you think the 2-3 inch drop from the bio media section to the skimmer would be loud like SFReefer said? If so do you have any ideas to keep the sponge in use?
@billy
1y
Yeah I agree with SFreefer. Theres no need or benefit for that red area.
@BigCreamy
1y
Well the reason I had it that high was so that the level in the first chamber was higher. Less sound coming from the filter socks
Connecte-toi pour participer à la conversation.
The skimmer will also be much larger, it’ll be sticking out of the top of the tank but I can’t draw that haha