ソルトは始めたばかりです。1週間くらい前にコンドラクティスのイソギンチ...

hdzleslee
Leslee
@hdzleslee · 1年前

ソルトは始めたばかりです。1週間くらい前にコンドラクティスのイソギンチャクを入れて、最初は調子よさそうでした。昨日、水槽のある角から別の角へ動き始めたのに気づいて、今朝9時ごろ見たら最初の写真みたいになってました。縮んでる感じでした。今は2枚目みたいに見えます。何が起きてるか分かる人いますか?死んでしまった感じですか、それとも助けられる方法ありますか?

I’m new to saltwater. Got a condylactis anemone about a week ago and it seemed to be doing good. I noticed it started moving from one corner of my tank to another yesterday and when I saw it this morning around 9am it was like the first picture. Seemed to be shrinking. Now it looks like the second. Does anyone know what is going on? Could it be dead or is there any way to save it?

2 photos
11

コメント

ログインしてコメントする

タンク始めたんだね、おめでとう!Condylactisのイソギンチャクってほんとに放浪しがちだよね。特に、水流か照明が気に入らないときは。日中に水を吐き出してるみたいに縮んでるのは普通のこともあるけど、溶けてきてないかとか変な臭いがしないかは要チェックね。ナノ水槽はイソギンチャクだと

Hey congrats on starting your tank! Condylactis anemones are definitely wanderers, especially when they’re not happy about flow or lighting. Shrinking up like that can be normal during the day as they expel water, but keep an eye on it for signs of melting or a bad smell. Nano tanks can be a

ありがとう!今日はかなり良くなってるよ。

Thankyou! It’s doing a lot better today.

こう聞くのは、あなたが初心者って言ってたからなんだけど、タンクの照明は何を使ってる?理想の環境には150+のPARくらいちゃんと欲しい。 それから、水流もそこそこ必要で、触手が水中で揺れるようにしないとね。 最後に、イソギンチャクは特に繊細で、立ち上げ済み/安定した生態系が必要。数ヶ月経ってない新しいシステムに入れるなんて、私は絶対勧めないよ。 あと気をつけてね。Condysは魚を食べることで有名。いるイソギンチャクの中でもわりと攻撃的な方

I ask this because you say that you’re new - what lighting do you have on your tank? They need pretty decent lighting of 150+ par for an ideal environment. It also needs decent water flow to get its tentacles waving in the water. Lastly, nems are particularly sensitive creatures and need an established/stable ecosystem. I’d never suggest putting one in a brand new system (under a few months of age). Also be careful. Condys are known to be fish eaters. They’re one of the more aggressive nems out there

Hyggerの12”照明を使ってるよ。調整できるし、今のところはなんとか大丈夫そう。あと、そう!必要な分だけエサをあげてれば、魚は寄ってこないってのは見たことあるよ。特に大きいのは避けてるみたい:)

I have a 12” Hygger lighting. It’s adjustable and seems to be doing okay for now. And yes! I’ve seen that if you feed them as needed, they’ll keep away from fish especially the bigger ones :)

🤔🙏🪸

ナノ水槽はイソギンチャクだと難しいことがあるよ。放浪するのが好きだし、ストレスで縮んじゃうこともあるし。照明と水流はちゃんと合わせて、水質パラメータはこまめに見てね。小さい環境だとブレが早いから!

Nano tanks can be tricky with anemones since they like to wander and sometimes shrink up when stressed. Make sure your lighting and flow are on point and keep an eye on your water parameters since things can swing fast in a small setup!

ありがとう、がんばってみる!パワーヘッドも買ったんだけど、最初ほぼ吸い込まれちゃってたから、しばらく放置してたんだ。でも、何かに取り付けできるようになったなら、今度また試す必要あるかも:)

Thankyou, I’ll try! I have a power head that I got but it almost got sucked up into it when I first got it so I left it alone for a while but I might have to try again now that it is attached to something. :)

画像を開く

イソギンチャクにはガチで強い光が要るよ。私が理解してる限り、イソギンチャクの中でも一番光が必要な部類のネム種なんだよね。うちはCondyをだいたい250PARくらいにしてるんだけど、時々もっと欲しそうに手を伸ばしてるみたいに見える。 イソギンチャクバスケットか、イソギンチャクカップみたいな“巣”を買って、もう少し高い位置に浮かせる(上げる)って方法もあるよ。より光が当たるように。 あと給餌も必要で、うちは3日に1回あげてる。スーパーで売ってる生のエビでOKで、エビを小さめの塊にして、フィーディングトングであげてる。 それと、Clarkiiのクマノミをホストすることもあるよ

They need serious light, from what I understand the most lighting need of all the Nem species. I have my Condy under about 250 par and at times he seems like he is reaching for more. You can try getting an anemone basket or anemone cup type nest to raise him higher in the tank for more light. They require feedings I feed my anemones every 3 days . Just raw shrimp from the grocery store works, cut the shrimp into small chunks and feed with feeding tweezers And yes they will host a Clarkii clown

コメントの画像

それめっちゃいいね、あと参考になった!照明をいじって様子見してみたら、確かにちょっと良くなった感じする。これからも覚えとくね。エサはエビをあげてたんだけど!

That’s so cool, and also good to know! I did change the lighting to test it out, and he does look a bit better. I will keep that in mind from now on. I have been feeding shrimp though!

3dプリンター持ってるなら、イソギンチャク用のネストのsltファイル送れるよ。ガラスにリーフセーフなマグネットか吸盤で取り付けられるやつ。水槽内で少し高い位置に置けるから、光をもっと当てやすくなるいい方法だよ

If you have a 3d printer I can send you a slt file for an anemone nest which you can attach to the glass with reef safe magnets or suction cups. It’s a good way to get them higher up in the tank for more light

3dプリンター使えるから、それめっちゃ助かる。ぜひ!

I do have access to a 3d printer, that’d be awesome.

ログインして会話に参加しましょう。

ReefBayアプリをダウンロード
[email protected]
|
©ReefBay 2026

コミュニティに参加しよう

アカウントを作成してコミュニティに参加しましょう

または次の方法で続ける
Appleでサインイン
または次の方法で続ける
Appleでサインイン

アプリで使いたい方はこちら

QRコード

読み取ってアプリをダウンロード

ReefBayをダウンロード

スマートフォンでQRコードを読み取ってアプリをダウンロード

ReefBayダウンロード用QRコード

iOSとAndroidに対応