Vraag voor degenen die magnesiumwaarden testen met de Salifert reef tests. In de instructies staat dat je één druppel reagens per keer moet toevoegen totdat de oplossing grijs of blauw wordt, afhankelijk van wat je het eerst ziet. Het probleem waar ik tegenaan loop is dat de eerste kleurverandering paars is. Het is een soort grijzig paars, maar duidelijk niet “grijs”. De volgende druppel maakt het meestal blauw. Welke waarde gebruik je? Het verschil in de resultaten is minstens 30 ppm.
Question for those who test magnesium levels using the Salifert reef tests. The instructions say to add one drop of reagent at a time until the solution turns gray or blue, whichever you see first. The problem I’m running into is the first color shift is to purple. Its kind of grayish but clearly not “gray.” The next drop will usually then shift it to blue. Which reading do you use? The difference in the results is at least 30ppm.
Reacties
Log in om een reactie achter te laten
Nog geen reacties
Start als eerste het gesprek.
Ik wacht ook tot het helemaal blauw is. Weet niet wat de beste manier is. Maar zolang je het op dezelfde manier meet, zullen je resultaten in ieder geval consistent zijn.
I also wait until it’s fully blue. Not sure what the best way. But as long as you measure it the same way your results will at least be consistent.
Log in om mee te praten.
Ik zou persoonlijk de blauwe druppel gebruiken
I’d use the blue drop personally