Going to be moving from my biocibe to this 75 gallon with an Eshopps ADV-100 sump. Seams are good, but internal seals are lifting a little and the overflow box is loose on one side :(. I am in no rush to get this going, it working on it little by little every weekend and probably getting the seals done this weekend.
Does anyone have any experience with the sump? I haven’t been able to find too much information online and wan to make sure I get it right the first time.
Got tired of certain dosing pump ends reacting with the water so figured I'd make a overflow type of head. This is the first version. I'll see how it works when it's done printing
Having trouble figuring out where to mount / install the uv sterilizer
It’s metal around. Thought about maybe screwing into the metal somehow.
Or mount to the wall behind? Scares me a little having that water run out of the tank but idk where else to put it
Ok so plumbing is almost done!! Can’t wait tbh. The far right is where I want to add uv has a gate valve that’s closed atm. That’s going to connect to the bottom of the 4 way. This is all going to be plumbed on to the under side where doors sit. It will be with a ball valve. So when I get ball valve on wall facing me looking at tank should I fill or finish the uv plumbing. Note tank has been with me for 4 years now want water in it!!!
Does this work for return line with manifold/uv line off the right side and return line to the tank?
Got to love a little false advertisement to poison your tank. Definitely not 316 stainless
Hello. I just bought a booster pump for my RO system and needed help on hooking it up correctly. I will attach photos of what I have. I watched aquaready YouTube video and they do not have a Ro system like mine to follow. Any help would be appreciated!
Anyone have experience doing a in wall fishtank setup?
New home I’m moving to soon has the space to cut out a spot for my 300gallon monster and want to do an in the wall setup. Don’t current have a stand setup for it. Curious if anyone has any advice
*this is not my setup, pic for attention
Freshwater leak test and a glimpse of what it’s gonna look like
Finally! Almost have the 75 gallon up and running, bull heads come in today and will finish up plumbing once I decide how I want to place my sump.
Is this a good height for the drain pipe? It’s about 1/2” below the weirs of the overflow (to the hole at the top). Would that be where to measure into the bigger hole further down?
Will flex seal work on my aquarium
Going to be moving from my biocibe to this 75 gallon with an Eshopps ADV-100 sump. Seams are good, but internal seals are lifting a little and the overflow box is loose on one side :(. I am in no rush to get this going, it working on it little by little every weekend and probably getting the seals done this weekend.
Does anyone have any experience with the sump? I haven’t been able to find too much information online and wan to make sure I get it right the first time.
The owner at my job had an old 300 gallon tank that needs the bottom glass repaned or sealed with epoxy, just got it for the free!!