Hello, this is my first post so pardon me if I’m not in the right section.
Why is my GSP not opening? I got this exactly 2 weeks ago and the second photo is now.
About 5 days ago, my clownfish kicked sand all over it so I dusted it off, then moved in about 5in closer to the front and away from the clown’s cave (should be a bit stronger flow), but now it doesn’t open.
Also, what is that green bubble?
Thanks everyone
Salinity: 1.026 SG
Temperature: 78.2°F
Alkalinity: 8.1 dKH
Calcium: 418 ppm
Tank Volume: 20 Gallons cube
First ever torch added 2 hours ago, is this flow too severe ?
Flow advice. It seems I have a major dead zone in the center of my tank & random spots. I’ve adjusted the setting on my gyre I’ve added a smaller hygger (1/2) I honestly can’t figure out how to get the flow right to where it’s supposed to be. Any recommendations. Should I get rid of the gyre and replace it with the other hygger? Add a third pump? Below are pics of the pump setting and my scape with the dead areas. Would swapping the sides where the gyre is help etc TIA
I’ve had these corals for about four months now they have opened up, but for some reason they closed. I don’t know if it’s the flow or the temperature.
Hello, this is my first post so pardon me if I’m not in the right section.
Why is my GSP not opening? I got this exactly 2 weeks ago and the second photo is now.
About 5 days ago, my clownfish kicked sand all over it so I dusted it off, then moved in about 5in closer to the front and away from the clown’s cave (should be a bit stronger flow), but now it doesn’t open.
Also, what is that green bubble?
Thanks everyone
Salinity: 1.026 SG
Temperature: 78.2°F
Alkalinity: 8.1 dKH
Calcium: 418 ppm
Tank Volume: 20 Gallons cube
Is this enough flow for hammers or do they need more? Not kept them before so im still trying to figure things out.
Started with my first few corals, new powerheads tomorrow. More fish next week, it’s to easy to spend money! 😂 (bubbles are from an internal skimmer🤦♂️)
Still very very new to acro types. Is this too much flow for the new guy?
I’m after a new power head for my 168 litre tank? And suggestion on a decent one? Quite as possible preferably. 😂
PFA
New to this group and after some advice. I've just got my first torch coral and not really sure how much flow is too much. Any feedback would be appreciated.
Question, does it look like this Torch has enough flow? Sorry for the longer video.
Don't know if Reefbay is looking for a new idea but it something like this would help a lot of people. A flow simulator that shows dead spots and recommended placement of heads and wave makers
Is this flow good for my 24K gold torch I’m new to torch keeping but I do keep hammers. Nevermind Nyx she’s a bit of a photo bomber